Vadodara, Gujarat
GST No. 24AAJCG1466A1Z1
Call 08048967317 94% Response Rate
Product Brochure
Brand | Delta |
Model Name/Number | VFD2800CP43A-00 |
Motor Power | 280kW / 375HP |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3 Phase, 380-480V, 50 / 60Hz |
Output Current | 530 Amp |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. |
Control Procedure | Pulse Width Modulated (PWM) 1: V / F (V / F control),2: SVC (Sensorless Vector Control) |
Ambient Temp. | 50 Degree C |
Installation Type | IEC60364-1 / IEC60664-1 Pollution degree 2,indoor use only |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 120% of rated current: 1 minute for every 5 minutes; 160% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Delta’s Sensorless Vector Control Drive CP2000 Series has extended the idea of energy saving and uses this principal as the basis of its design. The Delta CP2000 is specifically designed for applications such as air blowers, pumps and HVAC drives with its intelligent PID control providing the greatest efficiency. The Sensorless Vector Control (SVC) offers timely response to load torque increase/decrease which satisfies customer requirements for load changes while enhancing motor performance. The Delta CP2000 series provides you with the ultimate energy-saving solution for your applications.
Specifications:
1 With a built-in 10K steps Delta PLC allows user to execute distributional control and independent control when connecting to a network system. Delta CP2000 series drives provide you the intelligent control possibility beyond your imagination.
2 The calendar function allows user to program the PLC procedure, the ON/OFF in chronological order, the daylight saving time and etc.
3 A wide range of models (0.75~400KW) to fulfill the demands of different industries.
4 The modularized design eases the maintenance and expansion.
5 High speed communication interfaces with MODBUS protocol and BACnet protocol built in. Diverse communication methods to satisfy clients needs on multi-controls. So the following options are available for you: the ProfiBUS-DP, the DeviceNet, the MODBUS TCP, the Ethernet-IP and the CANopen Cards.
6 Long-life design and self diagnosis for key components.
7 Special PCB coating design (Printed Circuit Board) for enhancing environmental tolerance.
8 Complied with global safety standards: CE, UL and cUL
9 Standard LCD model (IP20/NEMA1) with built-in PLC to support up to 10K steps
10 Excellent heat-sink design. Able to operate at 50°C ambient temperature and to adjust automatically rated output value to make the AC drive to work continuously.
11 Run fire mode while emergency to have uninterrupted smoke releasing and pressure adding
12 Multi pumps control at fixed amount, fixed time circulating control.
Additional Information:
View Complete details
Product Brochure
Brand | Delta |
Model Name/Number | VFD150CP43A-21 |
Motor Power | 15kW / 20 HP |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ), 50/60Hz |
Output Current | 30 Amp |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. |
Control Procedure | Pulse Width Modulated (PWM) 1: V / F (V / F control),2: SVC (Sensorless Vector Control) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 120% of rated current: 1 minute for every 5 minutes; 160% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Delta’s Sensorless Vector Control Drive CP2000 Series has extended the idea of energy saving and uses this principal as the basis of its design. The Delta CP2000 is specifically designed for applications such as air blowers, pumps and HVAC drives with its intelligent PID control providing the greatest efficiency. The Sensorless Vector Control (SVC) offers timely response to load torque increase/decrease which satisfies customer requirements for load changes while enhancing motor performance. The Delta CP2000 series provides you with the ultimate energy-saving solution for your applications.
Specifications:
1 With a built-in 10K steps Delta PLC allows user to execute distributional control and independent control when connecting to a network system. Delta CP2000 series drives provide you the intelligent control possibility beyond your imagination.
2 The calendar function allows user to program the PLC procedure, the ON/OFF in chronological order, the daylight saving time and etc.
3 A wide range of models (0.75~400KW) to fulfill the demands of different industries.
4 The modularized design eases the maintenance and expansion.
5 High speed communication interfaces with MODBUS protocol and BACnet protocol built in. Diverse communication methods to satisfy clients needs on multi-controls. So the following options are available for you: the ProfiBUS-DP, the DeviceNet, the MODBUS TCP, the Ethernet-IP and the CANopen Cards.
6 Long-life design and self diagnosis for key components.
7 Special PCB coating design (Printed Circuit Board) for enhancing environmental tolerance.
8 Complied with global safety standards: CE, UL and cUL
9 Standard LCD model (IP20/NEMA1) with built-in PLC to support up to 10K steps
10 Excellent heat-sink design. Able to operate at 50°C ambient temperature and to adjust automatically rated output value to make the AC drive to work continuously.
11 Run fire mode while emergency to have uninterrupted smoke releasing and pressure adding
12 Multi pumps control at fixed amount, fixed time circulating control.
Additional Information:
View Complete details
Product Brochure
Brand | Delta |
Model Name/Number | VFD110CP43A-21 |
Motor Power | 11kW / 15 hp |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ), 50/60Hz |
Output Current | 22.5 Amp |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. |
Control Procedure | Pulse Width Modulated (PWM) 1: V / F (V / F control),2: SVC (Sensorless Vector Control) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 120% of rated current: 1 minute for every 5 minutes; 160% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Delta’s Sensorless Vector Control Drive CP2000 Series has extended the idea of energy saving and uses this principal as the basis of its design. The Delta CP2000 is specifically designed for applications such as air blowers, pumps and HVAC drives with its intelligent PID control providing the greatest efficiency. The Sensorless Vector Control (SVC) offers timely response to load torque increase/decrease which satisfies customer requirements for load changes while enhancing motor performance. The Delta CP2000 series provides you with the ultimate energy-saving solution for your applications.
Specifications:
1 With a built-in 10K steps Delta PLC allows user to execute distributional control and independent control when connecting to a network system. Delta CP2000 series drives provide you the intelligent control possibility beyond your imagination.
2 The calendar function allows user to program the PLC procedure, the ON/OFF in chronological order, the daylight saving time and etc.
3 A wide range of models (0.75~400KW) to fulfill the demands of different industries.
4 The modularized design eases the maintenance and expansion.
5 High speed communication interfaces with MODBUS protocol and BACnet protocol built in. Diverse communication methods to satisfy clients needs on multi-controls. So the following options are available for you: the ProfiBUS-DP, the DeviceNet, the MODBUS TCP, the Ethernet-IP and the CANopen Cards.
6 Long-life design and self diagnosis for key components.
7 Special PCB coating design (Printed Circuit Board) for enhancing environmental tolerance.
8 Complied with global safety standards: CE, UL and cUL
9 Standard LCD model (IP20/NEMA1) with built-in PLC to support up to 10K steps
10 Excellent heat-sink design. Able to operate at 50°C ambient temperature and to adjust automatically rated output value to make the AC drive to work continuously.
11 Run fire mode while emergency to have uninterrupted smoke releasing and pressure adding
12 Multi pumps control at fixed amount, fixed time circulating control.
Additional Information:
View Complete details
Product Brochure
Brand | Delta |
Model Name/Number | VFD3150CP43C-00 |
Motor Power | 315kW / 425HP |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ), 50/60Hz |
Output Current | 616 Amp |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. |
Control Procedure | Pulse Width Modulated (PWM) 1: V / F (V / F control),2: SVC (Sensorless Vector Control) |
Ambient Temp. | 50 Degree C |
Installation Type | IEC60364-1 / IEC60664-1 Pollution degree 2,indoor use only |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 120% of rated current: 1 minute for every 5 minutes; 160% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Note: VFD3150CP43A-00 is no longer manufactured or sold. The Delta recommended replacement is the VFD3150CP43C-21 drive.
Delta’s Sensorless Vector Control Drive CP2000 Series has extended the idea of energy saving and uses this principal as the basis of its design. The Delta CP2000 is specifically designed for applications such as air blowers, pumps and HVAC drives with its intelligent PID control providing the greatest efficiency. The Sensorless Vector Control (SVC) offers timely response to load torque increase/decrease which satisfies customer requirements for load changes while enhancing motor performance. The Delta CP2000 series provides you with the ultimate energy-saving solution for your applications.
Specifications:
1 With a built-in 10K steps Delta PLC allows user to execute distributional control and independent control when connecting to a network system. Delta CP2000 series drives provide you the intelligent control possibility beyond your imagination.
2 The calendar function allows user to program the PLC procedure, the ON/OFF in chronological order, the daylight saving time and etc.
3 A wide range of models (0.75~400KW) to fulfill the demands of different industries.
4 The modularized design eases the maintenance and expansion.
5 High speed communication interfaces with MODBUS protocol and BACnet protocol built in. Diverse communication methods to satisfy clients needs on multi-controls. So the following options are available for you: the ProfiBUS-DP, the DeviceNet, the MODBUS TCP, the Ethernet-IP and the CANopen Cards.
6 Long-life design and self diagnosis for key components.
7 Special PCB coating design (Printed Circuit Board) for enhancing environmental tolerance.
8 Complied with global safety standards: CE, UL and cUL
9 Standard LCD model (IP20/NEMA1) with built-in PLC to support up to 10K steps
10 Excellent heat-sink design. Able to operate at 50°C ambient temperature and to adjust automatically rated output value to make the AC drive to work continuously.
11 Run fire mode while emergency to have uninterrupted smoke releasing and pressure adding
12 Multi pumps control at fixed amount, fixed time circulating control.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD900C43A |
Motor Power | 460 Volts AC |
Input Voltage | 323 ~ 528 VAC |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ),50 / 60 Hz |
Output Current | 180 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Warranty | 12 Months |
Overload Capacity | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD900C43A
Manufacturer: Delta Products
Item Category: Drive
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 171 Amps
HP (VT): 125 Horsepower
Amps (VT): 180 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Optional (External)
Frame Size: E
Height: 28.18 Inches
Width: 14.57 Inches
Depth: 11.81 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD185C43A |
Motor Power | 460 Volts AC |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3-phase AC 200 V ~ 240 V (-15% ~ +10%),50 / 60 Hz |
Output Current | 38 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specification
Item Number: VFD185C43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 36 Amps
HP (VT): 25 Horsepower
Amps (VT): 38 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Included
Frame Size: C
Height: 15.75 Inches
Width: 9.84 Inches
Depth: 8.27 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD3350C43A |
Motor Power | 460 Volts AC |
Input Voltage | AC 380 V ~ 480 V |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ), 50 / 60 Hz |
Output Current | 683 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode, starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 120% of rated current: 1 minute for every 5 minutes; 160% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD3550C43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 649 Amps
HP (VT): 475 Horsepower
Amps (VT): 683 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Optional (External)
Frame Size: H
Height: 68.07 Inches
Width: 27.56 Inches
Depth: 15.67 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD3150C43A |
Motor Power | 460 Volts AC |
Input Voltage | AC 380 V ~ 480 V |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ),50 / 60 Hz |
Output Current | 616 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 120% of rated current: 1 minute for every 5 minutes; 160% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD3150C43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 585 Amps
HP (VT): 425 Horsepower
Amps (VT): 616 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Optional (External)
Frame Size: H
Height: 68.07 Inches
Width: 27.56 Inches
Depth: 15.67 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD2800C43A |
Motor Power | 460 Volts AC |
Input Voltage | AC 380 V ~ 480 V |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ), 50 / 60 Hz |
Output Current | 550 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode, starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD2800C43A
Manufacturer: Delta Products
Item Category: Drive
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 523 Amps
HP (VT): 375 Horsepower
Amps (VT): 550 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Optional (External)
Frame Size: H
Height: 68.70 Inches
Width: 27.26 Inches
Depth: 15.67 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD2200C43A |
Motor Power | 460 Volts AC |
Input Voltage | 380 to 480 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ), 50 / 60 Hz |
Output Current | 460 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode, starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD2200C43A
Manufacturer: Delta Products
Item Category: Drive
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 437 Amps
HP (VT): 300 Horsepower
Amps (VT): 460 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Optional (External)
Frame Size: G
Height: 48.83 Inches
Width: 19.69 Inches
Depth: 15.63 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD1850C43A |
Motor Power | 460 Volts AC |
Input Voltage | 380 to 480 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ), 50 / 60 Hz |
Output Current | 370 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode, starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD1850C43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 352 Amps
HP (VT): 250 Horsepower
Amps (VT): 370 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Optional (External)
Frame Size: G
Height: 39.37 Inches
Width: 19.69 Inches
Depth: 15.63 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD1600C43A |
Motor Power | 460 Volts AC |
Input Voltage | AC 380 V ~ 480 V |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ), 50 / 60 Hz |
Output Current | 310 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode, starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Installation Type | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD1600C43A
Manufacturer: Delta Products
Item Category: Drive
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 295 Amps
HP (VT): 215 Horsepower
Amps (VT): 310 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Optional (External)
Frame Size: F
Height: 37.00 Inches
Width: 16.54 Inches
Depth: 11.81 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD1320C43A |
Motor Power | 460 Volts AC |
Input Voltage | AC 380 V ~ 480 V |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ),50 / 60 Hz |
Output Current | 260 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 180% of rated current can endure for 3 seconds during every 30 seconds |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD1320C43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 247 Amps
HP (VT): 175 Horsepower
Amps (VT): 260 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Optional (External)
Frame Size: F
Height: 31.5 Inches
Width: 16.54 Inches
Depth: 11.81 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD1100C43A |
Motor Power | 460 Volts AC |
Input Voltage | AC 380 V ~ 480 V |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ),50 / 60 Hz |
Output Current | 220 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 180% of rated current can endure for 3 seconds during every 30 seconds |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD1100C43A
Manufacturer: Delta Products
Item Category: Drive
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 209 Amps
HP (VT): 150 Horsepower
Amps (VT): 220 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Optional (External)
Frame Size: E
Height: 28.18 Inches
Width: 14.57 Inches
Depth: 11.81 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Model Name/Number | VFD055C43A |
Motor Power | 460 Volts AC |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3-phase AC 200 V ~ 240 V (-15% ~ +10%),50 / 60 Hz |
Output Current | 91 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Installation Type | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD550C43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 105 Amps
HP (VT): 75 Horsepower
Amps (VT): 110 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Optional (External)
Frame Size: D
Height: 21.65 Inches
Width: 12.99 Inches
Depth: 10.83 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD450C43S |
Motor Power | 460 Volts AC |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3-phase AC 200 V ~ 240 V (-15% ~ +10%),50 / 60 Hz |
Output Current | 73 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Installation Type | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications:
Item Number: VFD450C43S
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Amps (VT): 60 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Included
Frame Size: A
Height: 9.84 Inches
Width: 5.12 Inches
Depth: 6.69 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD370C43S |
Motor Power | 460 Volts AC |
Input Voltage | 323 ~ 528 VAC |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ),50 / 60 Hz |
Output Current | 73 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Acceleration Time | 0.00 ~ 600.00 / 0.0 ~ 6000.0 Seconds |
Warranty | 12 Months |
Overload Capacity | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Input Tolerance | 47-63Hz |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications:
Item Number: VFD370C43S
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Amps (CT): 69 Amps
HP (VT): 50 Horsepower
Amps (VT): 73 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Included
Height: 9.84 Inches
Width: 5.12 Inches
Depth: 6.69 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD220C43A |
Motor Power | 460 Volts AC |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 47~63 Hz |
Output Current | 45 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD220C43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 43 Amps
HP (VT): 30 Horsepower
Amps (VT): 45 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Included
Frame Size: C
Height: 15.75 Inches
Width: 9.84 Inches
Depth: 8.27 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD150C43A |
Motor Power | 460 Volts AC |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3-phase AC 200 V ~ 240 V (-15% ~ +10%),50 / 60 Hz |
Output Current | 32 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Warranty | 12 Months |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD150C43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 30 Amps
HP (VT): 20 Horsepower
Amps (VT): 32 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Included
Frame Size: B
Height: 12.6 Inches
Width: 7.48 Inches
Depth: 7.48 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD110C43A |
Motor Power | 460 Volts AC |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3-phase AC 200 V ~ 240 V (-15% ~ +10%),50 / 60 Hz |
Output Current | 24 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD110C43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 23 Amps
HP (VT): 15 Horsepower
Amps (VT): 24 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Included
Frame Size: B
Height: 12.6 Inches
Width: 7.48 Inches
Depth: 7.48 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD075C43A |
Motor Power | 460 Volts AC |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3-phase AC 200 V ~ 240 V (-15% ~ +10%),50 / 60 Hz |
Output Current | 18 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD075C43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 17 Amps
HP (VT): 10 Horsepower
Amps (VT): 18 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Included
Frame Size: B
Height: 12.6 Inches
Width: 7.48 Inches
Depth: 7.48 Inches
Additional Information:
View Complete details
Product Brochure
Brand | Delta |
Model Name/Number | VFD015CB43A-20M |
Motor Power | 1.5KW/2HP |
Input Voltage | 380 V ~ 480 V (-15% ~ +10%) |
Input Phase | 3 - Phase |
Input Frequency | 47~63 Hz |
Output Current | 4.0 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. In FOC+PG mode,starting torque reaches above 150% at 0.5 Hz an |
Control Procedure | V / F,V / F+PG,SVC,FOC Sensorless,FOC+PG,PM Sensorless*,TQC+PG,TQC Sensorless |
Ambient Temp. | -10 ~ 50 C IP20 / UL Open Type -10 ~ 40 C IP20 / NEMA1 |
Installation Type | IEC60364-1 / IEC60664-1 Pollution degree 2,indoor use only |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Degree of Protection | IP20 / UL Open,IP20 / NEMA1 |
EMC | Built In |
Overload Capacity | Rated output current: 150% for 1 minute; 180% 3 seconds |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Cooling Method | Natural Cooling |
The VFD-C200 Series is an intelligent vector control micro drive that provides versatile control modes for motors and includes built-in PLC functions with capacity up to 5,000 steps. It is suitable for harsh environment applications with a strengthened thermal and anti-dust design that provides comprehensive protection.
Specifications:
· Built-in PLC program with 5,000 steps capacity
· Built-in brake chopper
· MODBUS RS-485 and CANopen (Slave)
· The high-brightness LED keypad shares the same extension cable of the VFD-E/M/B Series to maximize operation distance
· Supports open loop control of permanent motors (PM Sensorless)
· Two high speed pulse input terminals MI7 and MI8 built-in with maximum speed up to 33kHz
· Two high speed pulse output terminals DFM1 and DFM2 built-in with maximum speed up to 33kHz
· New PCB coating for circuit (IEC 60721-3-3 class 3C2) and thermal design suitable for harsh environment applications
· C200 Series Frame A supports wall mounted installation
Additional Information:
View Complete details
Product Brochure
Brand | Delta |
Model Name/Number | VFD037CB43A-20 / B-20 |
Motor Power | 3.7KW/5HP |
Input Voltage | 380 V ~ 480 V ( -15% ~ +10%) |
Input Phase | 3 - Phase |
Input Frequency | 47~63 Hz |
Output Current | 8.1 Amp |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Ambient Temp. | 50 Degree C |
Installation Type | IEC60364-1 / IEC60664-1 Pollution degree 2,indoor use only |
Acceleration Time | 0.0 ~ 6000.0 seconds |
Warranty | 12 Months |
Overload Capacity | Rated output current: 150% for 1 minute; 180% 3 seconds |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Cooling Method | Fan Cooling |
The VFD-C200 Series is an intelligent vector control micro drive that provides versatile control modes for motors and includes built-in PLC functions with capacity up to 5,000 steps. It is suitable for harsh environment applications with a strengthened thermal and anti-dust design that provides comprehensive protection.
Specifications:
· Built-in PLC program with 5,000 steps capacity
· Built-in brake chopper
· MODBUS RS-485 and CANopen (Slave)
· The high-brightness LED keypad shares the same extension cable of the VFD-E/M/B Series to maximize operation distance
· Supports open loop control of permanent motors (PM Sensorless)
· Two high speed pulse input terminals MI7 and MI8 built-in with maximum speed up to 33kHz
· Two high speed pulse output terminals DFM1 and DFM2 built-in with maximum speed up to 33kHz
· New PCB coating for circuit (IEC 60721-3-3 class 3C2) and thermal design suitable for harsh environment applications
· C200 Series Frame A supports wall mounted installation
Additional Information:
View Complete details
Product Brochure
Brand | Delta |
Model Name/Number | VFD015CB21A-20M |
Motor Power | 1.5KW/2HP |
Input Voltage | 200 V ~ 240 V (-15% ~ +10%) |
Input Phase | 1 - Phase |
Input Frequency | 50/60Hz |
Output Current | 5 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. In FOC+PG mode,starting torque reaches above 150% at 0.5 Hz an |
Control Procedure | V / F,V / F+PG,SVC,FOC Sensorless,FOC+PG,PM Sensorless*,TQC+PG,TQC Sensorless |
Ambient Temp. | -10 ~ 50 Deg C IP20 / UL Open Type -10 ~ 40 Deg C IP20 / NEMA1 |
Installation Type | IEC60364-1 / IEC60664-1 Pollution degree 2,indoor use only |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Degree of Protection | IP20 / UL Open,IP20 / NEMA1 |
EMC | Built In |
Overload Capacity | Rated output current: 150% for 1 minute; 180% 3 seconds |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Application | Processing Machines, Packaging Machines, Textile Machines, Printing Machines, Material Hand Machines |
The VFD-C200 Series is an intelligent vector control micro drive that provides versatile control modes for motors and includes built-in PLC functions with capacity up to 5,000 steps. It is suitable for harsh environment applications with a strengthened thermal and anti-dust design that provides comprehensive protection.
2HP 230V 1PH 7.1A
Specifications:
· Built-in PLC program with 5,000 steps capacity
· Built-in brake chopper
· MODBUS RS-485 and CANopen (Slave)
· The high-brightness LED keypad shares the same extension cable of the VFD-E/M/B Series to maximize operation distance
· Supports open loop control of permanent motors (PM Sensorless)
· Two high speed pulse input terminals MI7 and MI8 built-in with maximum speed up to 33kHz
· Two high speed pulse output terminals DFM1 and DFM2 built-in with maximum speed up to 33kHz
· New PCB coating for circuit (IEC 60721-3-3 class 3C2) and thermal design suitable for harsh environment applications
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD037C43A |
Motor Power | 460 Volts AC |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3-phase AC 200 V ~ 240 V (-15% ~ +10%),50 / 60 Hz |
Output Current | 9.0 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD037C43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 8.1 Amps
HP (VT): 5 Horsepower
Amps (VT): 9 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Included
Frame Size: A
Height: 9.84 Inches
Width: 5.12 Inches
Depth: 6.69 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD037E43A |
Motor Power | 3.7 kW / 5.0 hp |
Input Voltage | 460V |
Input Phase | 3 - Phase |
Input Frequency | 3 Phase,380-480V,50 / 60Hz |
Output Current | 8.5 |
Control Procedure | Built In |
Warranty | as per Delta T&C |
Enclosure Rating | IP20 |
Input Tolerance | 342-528V |
The VFD-E series represent Delta Electronics low horsepower, constant torque, IP20 rated Drive. Modular in design with flexible extension cards and a built-in PLC function, the E drive offers the ability to write and to execute simple Ladder Logic programs. This state-of-the-art series meets a full range of application requirements.
Delta VFD037E43A Specifications
Item Number: VFD037E43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: VFD-E
Nominal Input VAC: 480 Volts AC
Input Range VAC: 380 to 480 Volts AC
HP (CT): 5 Horsepower
Amps (CT): 8.5 Amps
Input Phase: 3
Operator Controls: Sold Separately, See Accessories
Max. Frequency: 600 Hertz
Braking Type: DC Injection; Dynamic Braking
Motor Control-Max Level: Open Loop Vector (Sensorless Vector)
Closed Loop: No
AC Line Regenerative?: No
Dynamic Braking Trans?: Included
Enclosure Rating: IP20
Frame Size: B
Height: 6.85 Inches
Width: 3.94 Inches
Depth: 5.35 Inches
Comments: LED Status Indicator Included, Keypad Sold Separately.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD220E43A |
Motor Power | 22kW / 30hp |
Input Voltage | 460V |
Input Phase | 3 - Phase |
Input Frequency | 3 Phase,380-480V,50 / 60Hz |
Output Current | 45 |
Control Procedure | Built In |
Warranty | as per Delta T&C |
Enclosure Rating | IP20 |
Input Tolerance | 342-528V |
The VFD-E series represent Delta Electronics low horsepower, constant torque, IP20 rated Drive. Modular in design with flexible extension cards and a built-in PLC function, the E drive offers the ability to write and to execute simple Ladder Logic programs. This state-of-the-art series meets a full range of application requirements.
Specifications
Item Number: VFD220E43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: VFD-E
Nominal Input VAC: 480 Volts AC
Input Range VAC: 380 to 480 Volts AC
HP (CT): 30 Horsepower
Amps (CT): 45 Amps
Input Phase: 3
Operator Controls: Sold Separately, See Accessories
Max. Frequency: 600 Hertz
Braking Type: DC Injection;Dynamic Braking
Motor Control-Max Level: Open Loop Vector (Sensorless Vector)
Closed Loop: No
AC Line Regenerative?: No
Dynamic Braking Trans?: Included
Enclosure Rating: IP20
Frame Size: D
Height: 12.20 Inches
Width: 7.87 Inches
Depth: 7.48 Inches
Comments: LED Status Indicator Included, Keypad Sold Separately.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD015C43A |
Motor Power | 460 Volts AC |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3-phase AC 200 V ~ 240 V (-15% ~ +10%),50 / 60 Hz |
Output Current | 4.0 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Acceleration Time | 0.00 ~ 600.00 / 0.0 ~ 6000.0 Seconds |
Warranty | 12 Months |
Overload Capacity | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47 ~ 63 Hz |
Amps (CT) | 3.8 Amps |
HP (VT) | 2 Horsepower |
Amps (VT) | 4 Amps |
Operator Controls | Keypad Included |
Braking Type | DC Injection;Dynamic Braking;AC Line Regenerative |
Motor Control-Max Level | Closed Loop Vector |
Closed Loop | Yes |
AC Line Regenerative | Yes |
Dynamic Braking Trans | Included |
Specifications
Item Number: VFD015C43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 3.8 Amps
HP (VT): 2 Horsepower
Amps (VT): 4 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Included
Frame Size: A
Height: 9.84 Inches
Width: 5.12 Inches
Depth: 6.69 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Model Name/Number | VFD022C43A |
Motor Power | 460 Volts AC |
Input Voltage | 380 V ~ 480 V ( -15% ~ +10%) |
Input Phase | 3 - Phase |
Input Frequency | 3-phase AC 200 V ~ 240 V (-15% ~ +10%),50 / 60 Hz |
Output Current | 6.0 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Acceleration Time | 0.00 ~ 600.00 / 0.0 ~ 6000.0 Seconds |
Warranty | 12 Months |
Overload Capacity | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47 ~ 63 Hz |
Amps (CT) | 3.8Amps |
HP (VT) | 2 Horsepower |
Amps (VT) | 4 Amps |
Operator Controls | Keypad Included |
Braking Type | DC Injection;Dynamic Braking;AC Line Regenerative |
Motor Control-Max Level | Closed Loop Vector |
Closed Loop | Yes |
AC Line Regenerative | Yes |
Dynamic Braking Trans | Included |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD022C43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 5.7 Amps
HP (VT): 3 Horsepower
Amps (VT): 6 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Included
Frame Size: A
Height: 9.84 Inches
Width: 5.12 Inches
Depth: 6.69 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD040C43A |
Motor Power | 460 Volts AC |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3-phase AC 200 V ~ 240 V (-15% ~ +10%),50 / 60 Hz |
Output Current | 10.5 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Ambient Temp. | 12 Months |
Installation Type | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Acceleration Time | IP20 |
Warranty | 12 Months |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD040C43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 9.5 Amps
HP (VT): 5 Horsepower
Amps (VT): 10.5 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Included
Frame Size: A
Height: 9.84 Inches
Width: 5.12 Inches
Depth: 6.69 Inches
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD055C43A |
Motor Power | 460 Volts AC |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3-phase AC 200 V ~ 240 V (-15% ~ +10%),50 / 60 Hz |
Output Current | 12 Amp |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. Under FOC+PG mode,starting torque can reach 150% at 0 Hz |
Control Procedure | Pulse Width Modulated (PWM) |
Acceleration Time | 0.00 ~ 600.00 / 0.0 ~ 6000.0 Seconds |
Warranty | 12 Months |
Overload Capacity | 150% of rated current: 1 minute for every 5 minutes; 180% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47 ~ 63 Hz |
The VFD-C2000 series is a high performance FOC (Field Oriented Control) AC drive. This drive is extremely versatile with a real built-in PLC, numerous control options, over 300 parameters, predesigned application features, and a large LCD HMI keypad. These features coupled with input voltages of 230/460vac and a HP range of 1-800 make the C2000 a product for markets around the globe.
Specifications
Item Number: VFD055C43A
Manufacturer: Delta Products
Item Category: Drives
Subcategory: AC
Series: C2000
Nominal Input VAC: 460 Volts AC
Input Range VAC: 323 to 528 Volts AC
Amps (CT): 11 Amps
HP (VT): 7.5 Horsepower
Amps (VT): 12 Amps
Input Phase: 3
Operator Controls: Keypad Included
Braking Type: DC Injection;Dynamic Braking;AC Line Regenerative
Motor Control-Max Level: Closed Loop Vector
Closed Loop: Yes
AC Line Regenerative?: Yes
Dynamic Braking Trans?: Included
Frame Size: A
Height: 9.84 Inches
Width: 5.12 Inches
Depth: 6.69 Inches
Additional Information:
View Complete details
Product Brochure
Brand | Delta |
Model Name/Number | VFD040CB43A-20 / B-20 |
Motor Power | 4KW |
Input Voltage | 380 V ~ 480 V (-15% ~ +10%) |
Input Phase | 3 - Phase |
Input Frequency | 47~63 Hz |
Output Current | 10.5 Amp |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. In FOC+PG mode,starting torque reaches above 150% at 0.5 Hz an |
Control Procedure | V / F,V / F+PG,SVC,FOC Sensorless,FOC+PG,PM Sensorless*,TQC+PG,TQC Sensorless |
Ambient Temp. | -10 ~ 50 C IP20 / UL Open Type -10 ~ 40 C IP20 / NEMA1 |
Installation Type | IEC60364-1 / IEC60664-1 Pollution degree 2,indoor use only |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Degree of Protection | IP20 / UL Open,IP20 / NEMA1 |
Overload Capacity | Rated output current: 150% for 1 minute; 180% 3 seconds |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Cooling Method | Fan Cooling |
The VFD-C200 Series is an intelligent vector control micro drive that provides versatile control modes for motors and includes built-in PLC functions with capacity up to 5,000 steps. It is suitable for harsh environment applications with a strengthened thermal and anti-dust design that provides comprehensive protection.
Specifications:
· Built-in PLC program with 5,000 steps capacity
· Built-in brake chopper
· MODBUS RS-485 and CANopen (Slave)
· The high-brightness LED keypad shares the same extension cable of the VFD-E/M/B Series to maximize operation distance
· Supports open loop control of permanent motors (PM Sensorless)
· Two high speed pulse input terminals MI7 and MI8 built-in with maximum speed up to 33kHz
· Two high speed pulse output terminals DFM1 and DFM2 built-in with maximum speed up to 33kHz
· New PCB coating for circuit (IEC 60721-3-3 class 3C2) and thermal design suitable for harsh environment applications
· C200 Series Frame A supports wall mounted installation
Additional Information:
View Complete details
Product Brochure
Brand | Delta |
Model Name/Number | VFD055CB43A-20 / B-20 |
Motor Power | 5.5KW/7.5HP |
Input Voltage | 380 V ~ 480 V (-15% ~ +10%) |
Input Phase | 3 - Phase |
Input Frequency | 47~63 HZ |
Output Current | 12 Amp |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. In FOC+PG mode,starting torque reaches above 150% at 0.5 Hz an |
Control Procedure | V / F,V / F+PG,SVC,FOC Sensorless,FOC+PG,PM Sensorless*,TQC+PG,TQC Sensorless |
Ambient Temp. | -10 ~ 50 C IP20 / UL Open Type -10 ~ 40 C IP20 / NEMA1 |
Installation Type | IEC60364-1 / IEC60664-1 Pollution degree 2,indoor use only |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Degree of Protection | IP20 / UL Open,IP20 / NEMA1 |
EMC | Built In |
Overload Capacity | Rated output current: 150% for 1 minute; 180% 3 seconds |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Cooling Method | Fan Cooling |
The VFD-C200 Series is an intelligent vector control micro drive that provides versatile control modes for motors and includes built-in PLC functions with capacity up to 5,000 steps. It is suitable for harsh environment applications with a strengthened thermal and anti-dust design that provides comprehensive protection.
Specifications:
1. Built-in PLC program with 5,000 steps capacity
2. Built-in brake chopper
3. MODBUS RS-485 and CANopen (Slave)
4. The high-brightness LED keypad shares the same extension cable of the VFD-E/M/B Series to maximize operation distance
5. Supports open loop control of permanent motors (PM Sensorless)
6. Two high speed pulse input terminals MI7 and MI8 built-in with maximum speed up to 33kHz
7. Two high speed pulse output terminals DFM1 and DFM2 built-in with maximum speed up to 33kHz
8. New PCB coating for circuit (IEC 60721-3-3 class 3C2) and thermal design suitable for harsh environment applications
9. C200 Series Frame A supports wall mounted installation
Additional Information:
View Complete details
Product Brochure
Brand | Delta |
Model Name/Number | VFD007CB43A-20M |
Motor Power | 20.75KW/1HP |
Input Voltage | 380 V ~ 480 V (-15% ~ +10%) |
Input Phase | 3 - Phase |
Input Frequency | 47~63 Hz |
Output Current | 3 Amp. |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. In FOC+PG mode,starting torque reaches above 150% at 0.5 Hz an |
Control Procedure | V / F,V / F+PG,SVC,FOC Sensorless,FOC+PG,PM Sensorless*,TQC+PG,TQC Sensorless |
Ambient Temp. | -10 ~ 50 C IP20 / UL Open Type -10 ~ 40 C IP20 / NEMA1 |
Installation Type | IEC60364-1 / IEC60664-1 Pollution degree 2,indoor use only |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Degree of Protection | IP20 / UL Open,IP20 / NEMA1 |
EMC | Built In |
Overload Capacity | Rated output current: 150% for 1 minute; 180% 3 seconds |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Application | Processing Machines,Packaging Machines,Textile Machines,Printing Machines,Material Hand Machines |
Cooling Method | Natural Cooling |
The VFD-C200 Series is an intelligent vector control micro drive that provides versatile control modes for motors and includes built-in PLC functions with capacity up to 5,000 steps. It is suitable for harsh environment applications with a strengthened thermal and anti-dust design that provides comprehensive protection.
Specifications:
· Built-in PLC program with 5,000 steps capacity
· Built-in brake chopper
· MODBUS RS-485 and CANopen (Slave)
· The high-brightness LED keypad shares the same extension cable of the VFD-E/M/B Series to maximize operation distance
· Supports open loop control of permanent motors (PM Sensorless)
· Two high speed pulse input terminals MI7 and MI8 built-in with maximum speed up to 33kHz
· Two high speed pulse output terminals DFM1 and DFM2 built-in with maximum speed up to 33kHz
· New PCB coating for circuit (IEC 60721-3-3 class 3C2) and thermal design suitable for harsh environment applications
· C200 Series Frame A supports wall mounted installation
Additional Information:
View Complete details
Product Brochure
Brand | Delta |
Model Name/Number | VFD022CB43A-20M |
Motor Power | 2.2KW/3HP |
Input Voltage | 380 V ~ 480 V (-15% ~ +10%) |
Input Phase | 3 - Phase |
Input Frequency | 47~63 Hz |
Output Current | 6.0 |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. In FOC+PG mode,starting torque reaches above 150% at 0.5 Hz an |
Control Procedure | V / F,V / F+PG,SVC,FOC Sensorless,FOC+PG,PM Sensorless*,TQC+PG,TQC Sensorless |
Ambient Temp. | -10 ~ 50 C IP20 / UL Open Type -10 ~ 40 C IP20 / NEMA1 |
Installation Type | IEC60364-1 / IEC60664-1 Pollution degree 2,indoor use only |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Degree of Protection | IP20 / UL Open,IP20 / NEMA1 |
EMC | Built In |
Overload Capacity | Rated output current: 150% for 1 minute; 180% 3 seconds |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Application | Processing Machines,Packaging Machines,Textile Machines,Printing Machines,Material Hand Machines |
Cooling Method | Fan cooling |
415V, 2.2KW / 3HP, Inbuilt PLC, Braking chopper, Display unit.
The VFD-C200 Series is an intelligent vector control micro drive that provides versatile control modes for motors and includes built-in PLC functions with capacity up to 5,000 steps. It is suitable for harsh environment applications with a strengthened thermal and anti-dust design that provides comprehensive protection.
Specifications:
· Built-in PLC program with 5,000 steps capacity
· Built-in brake chopper
· MODBUS RS-485 and CANopen (Slave)
· The high-brightness LED keypad shares the same extension cable of the VFD-E/M/B Series to maximize operation distance
· Supports open loop control of permanent motors (PM Sensorless)
· Two high speed pulse input terminals MI7 and MI8 built-in with maximum speed up to 33kHz
· Two high speed pulse output terminals DFM1 and DFM2 built-in with maximum speed up to 33kHz
· New PCB coating for circuit (IEC 60721-3-3 class 3C2) and thermal design suitable for harsh environment applications
· C200 Series Frame A supports wall mounted installation
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD022CP4EB-21 |
Motor Power | 2.2kW / 3HP |
Input Voltage | 323 ~ 528 Vac |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ), 50/60Hz |
Output Current | 5 Amp(ND) |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. |
Control Procedure | Pulse Width Modulated (PWM) 1: V / F (V / F control),2: SVC (Sensorless Vector Control) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 120% of rated current: 1 minute for every 5 minutes; 160% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Note: VFD022CP43A-21 is no longer manufactured or sold. The Delta recommended replacement is the VFD022CP4EB-21 drive.
Delta’s Sensorless Vector Control Drive CP2000 Series has extended the idea of energy saving and uses this principal as the basis of its design. The Delta CP2000 is specifically designed for applications such as air blowers, pumps and HVAC drives with its intelligent PID control providing the greatest efficiency. The Sensorless Vector Control (SVC) offers timely response to load torque increase/decrease which satisfies customer requirements for load changes while enhancing motor performance. The Delta CP2000 series provides you with the ultimate energy-saving solution for your applications.
Drive, AC, 3HP 460V, 5A, 3phase input, Internal EMI Filter, Variable Torque Drive
Specifications:
Additional Information:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Delta |
Model Name/Number | VFD007CP43EA-21 |
Motor Power | 0.75kW / 1.0 hp |
Input Voltage | 323 ~ 528 Vac |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ), 50/60Hz |
Output Current | 3 Amp(ND) |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. |
Control Procedure | Pulse Width Modulated (PWM) 1: V / F (V / F control),2: SVC (Sensorless Vector Control) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 120% of rated current: 1 minute for every 5 minutes; 160% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Delta’s Sensorless Vector Control Drive CP2000 Series has extended the idea of energy saving and uses this principal as the basis of its design. The Delta CP2000 is specifically designed for applications such as air blowers, pumps and HVAC drives with its intelligent PID control providing the greatest efficiency. The Sensorless Vector Control (SVC) offers timely response to load torque increase/decrease which satisfies customer requirements for load changes while enhancing motor performance. The Delta CP2000 series provides you with the ultimate energy-saving solution for your applications.
Specifications:
1 With a built-in 10K steps Delta PLC allows user to execute distributional control and independent control when connecting to a network system. Delta CP2000 series drives provide you the intelligent control possibility beyond your imagination.
2 The calendar function allows user to program the PLC procedure, the ON/OFF in chronological order, the daylight saving time and etc.
3 A wide range of models (0.75~400KW) to fulfill the demands of different industries.
4 The modularized design eases the maintenance and expansion.
5 High speed communication interfaces with MODBUS protocol and BACnet protocol built in. Diverse communication methods to satisfy clients needs on multi-controls. So the following options are available for you: the ProfiBUS-DP, the DeviceNet, the MODBUS TCP, the Ethernet-IP and the CANopen Cards.
6 Long-life design and self diagnosis for key components.
7 Special PCB coating design (Printed Circuit Board) for enhancing environmental tolerance.
8 Complied with global safety standards: CE, UL and cUL
9 Standard LCD model (IP20/NEMA1) with built-in PLC to support up to 10K steps
10 Excellent heat-sink design. Able to operate at 50°C ambient temperature and to adjust automatically rated output value to make the AC drive to work continuously.
11 Run fire mode while emergency to have uninterrupted smoke releasing and pressure adding
12 Multi pumps control at fixed amount, fixed time circulating control.
Additional Information:
View Complete details
Product Brochure
Brand | Delta |
Model Name/Number | VFD037CP4EB-21 |
Motor Power | 3.7kW / 5 hp |
Input Voltage | 323 ~ 528 Vac |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ), 50/60Hz |
Output Current | 7.5 Amp(ND) |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. |
Control Procedure | Pulse Width Modulated (PWM) 1: V / F (V / F control),2: SVC (Sensorless Vector Control) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 120% of rated current: 1 minute for every 5 minutes; 160% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Note: VFD037CP43A-21 is no longer manufactured or sold. The Delta recommended replacement is the VFD037CP4EB-21 drive.
Delta’s Sensorless Vector Control Drive CP2000 Series has extended the idea of energy saving and uses this principal as the basis of its design. The Delta CP2000 is specifically designed for applications such as air blowers, pumps and HVAC drives with its intelligent PID control providing the greatest efficiency. The Sensorless Vector Control (SVC) offers timely response to load torque increase/decrease which satisfies customer requirements for load changes while enhancing motor performance. The Delta CP2000 series provides you with the ultimate energy-saving solution for your applications.
Specifications:
1 With a built-in 10K steps Delta PLC allows user to execute distributional control and independent control when connecting to a network system. Delta CP2000 series drives provide you the intelligent control possibility beyond your imagination.
2 The calendar function allows user to program the PLC procedure, the ON/OFF in chronological order, the daylight saving time and etc.
3 A wide range of models (0.75~400KW) to fulfill the demands of different industries.
4 The modularized design eases the maintenance and expansion.
5 High speed communication interfaces with MODBUS protocol and BACnet protocol built in. Diverse communication methods to satisfy clients needs on multi-controls. So the following options are available for you: the ProfiBUS-DP, the DeviceNet, the MODBUS TCP, the Ethernet-IP and the CANopen Cards.
6 Long-life design and self diagnosis for key components.
7 Special PCB coating design (Printed Circuit Board) for enhancing environmental tolerance.
8 Complied with global safety standards: CE, UL and cUL
9 Standard LCD model (IP20/NEMA1) with built-in PLC to support up to 10K steps
10 Excellent heat-sink design. Able to operate at 50°C ambient temperature and to adjust automatically rated output value to make the AC drive to work continuously.
11 Run fire mode while emergency to have uninterrupted smoke releasing and pressure adding
12 Multi pumps control at fixed amount, fixed time circulating control.
Additional Information:
View Complete details
Product Brochure
Brand | Delta |
Model Name/Number | VFD015CP43A-21 |
Motor Power | 1.5kW / 2 hp |
Input Voltage | 323 ~ 528 Vac |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ), 50/60Hz |
Output Current | 3.7Amp(ND) |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. |
Control Procedure | Pulse Width Modulated (PWM) 1: V / F (V / F control),2: SVC (Sensorless Vector Control) |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 120% of rated current: 1 minute for every 5 minutes; 160% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Delta’s Sensorless Vector Control Drive CP2000 Series has extended the idea of energy saving and uses this principal as the basis of its design. The Delta CP2000 is specifically designed for applications such as air blowers, pumps and HVAC drives with its intelligent PID control providing the greatest efficiency. The Sensorless Vector Control (SVC) offers timely response to load torque increase/decrease which satisfies customer requirements for load changes while enhancing motor performance. The Delta CP2000 series provides you with the ultimate energy-saving solution for your applications.
Specifications:
1 With a built-in 10K steps Delta PLC allows user to execute distributional control and independent control when connecting to a network system. Delta CP2000 series drives provide you the intelligent control possibility beyond your imagination.
2 The calendar function allows user to program the PLC procedure, the ON/OFF in chronological order, the daylight saving time and etc.
3 A wide range of models (0.75~400KW) to fulfill the demands of different industries.
4 The modularized design eases the maintenance and expansion.
5 High speed communication interfaces with MODBUS protocol and BACnet protocol built in. Diverse communication methods to satisfy clients needs on multi-controls. So the following options are available for you: the ProfiBUS-DP, the DeviceNet, the MODBUS TCP, the Ethernet-IP and the CANopen Cards.
6 Long-life design and self diagnosis for key components.
7 Special PCB coating design (Printed Circuit Board) for enhancing environmental tolerance.
8 Complied with global safety standards: CE, UL and cUL
9 Standard LCD model (IP20/NEMA1) with built-in PLC to support up to 10K steps
10 Excellent heat-sink design. Able to operate at 50°C ambient temperature and to adjust automatically rated output value to make the AC drive to work continuously.
11 Run fire mode while emergency to have uninterrupted smoke releasing and pressure adding
12 Multi pumps control at fixed amount, fixed time circulating control.
Additional Information:
View Complete details
Product Brochure
Brand | Delta |
Model Name/Number | VFD220CP43A-21 |
Motor Power | 22kW / 30HP |
Input Voltage | 323 to 528 Volts AC |
Input Phase | 3 - Phase |
Input Frequency | 3 - phase AC 380 V ~ 480 V (-15% ~ +10% ), 50 / 60 Hz |
Output Current | 45 Amp |
Start Up Torque | Reach up to 150% or above at 0.5 Hz. |
Control Procedure | Pulse Width Modulated (PWM) 1: V / F (V / F control),2: SVC (Sensorless Vector Control) |
Ambient Temp. | 50 Degree C |
Installation Type | IEC60364-1 / IEC60664-1 Pollution degree 2,indoor use only |
Acceleration Time | 0.0 ~ 6000.0 seconds or 0.0 ~ 600.0 seconds |
Warranty | 12 Months |
Overload Capacity | 120% of rated current: 1 minute for every 5 minutes; 160% of rated current: 3 seconds for every 30 s |
Enclosure Rating | IP20 |
Input Tolerance | 47-63Hz |
Delta’s Sensorless Vector Control Drive CP2000 Series has extended the idea of energy saving and uses this principal as the basis of its design. The Delta CP2000 is specifically designed for applications such as air blowers, pumps and HVAC drives with its intelligent PID control providing the greatest efficiency. The Sensorless Vector Control (SVC) offers timely response to load torque increase/decrease which satisfies customer requirements for load changes while enhancing motor performance. The Delta CP2000 series provides you with the ultimate energy-saving solution for your applications.
Specifications:
1 With a built-in 10K steps Delta PLC allows user to execute distributional control and independent control when connecting to a network system. Delta CP2000 series drives provide you the intelligent control possibility beyond your imagination.
2 The calendar function allows user to program the PLC procedure, the ON/OFF in chronological order, the daylight saving time and etc.
3 A wide range of models (0.75~400KW) to fulfill the demands of different industries.
4 The modularized design eases the maintenance and expansion.
5 High speed communication interfaces with MODBUS protocol and BACnet protocol built in. Diverse communication methods to satisfy clients needs on multi-controls. So the following options are available for you: the ProfiBUS-DP, the DeviceNet, the MODBUS TCP, the Ethernet-IP and the CANopen Cards.
6 Long-life design and self diagnosis for key components.
7 Special PCB coating design (Printed Circuit Board) for enhancing environmental tolerance.
8 Complied with global safety standards: CE, UL and cUL
9 Standard LCD model (IP20/NEMA1) with built-in PLC to support up to 10K steps
10 Excellent heat-sink design. Able to operate at 50°C ambient temperature and to adjust automatically rated output value to make the AC drive to work continuously.
11 Run fire mode while emergency to have uninterrupted smoke releasing and pressure adding
12 Multi pumps control at fixed amount, fixed time circulating control.
Additional Information:
View Complete details