Gururaj Engineers Private Limited

Analog input 16 bit voltage/current 8 isolated channels

Made by GE Intelligent Platforms, the IC200ALG240 is a VersaMax Analog Input Module. This module is capable of processing input signals from a maximum of eight analog devices and providing data output at a resolution of 16 bits. The IC200ALG240 has two modes of operation: voltage mode and current mode. In voltage mode, the input range is 1 to 20 milliamps. In current mode, the input range is +/- 10 volts.

 

This module has eight isolated input channels, each of which has a current range of 4 to 20 milliamps. Additional features of this device include the ability to detect open wires, a converter resolution of 16 bits, and precise factory calibration. Certain features of the IC200ALG240 can also be configured and altered via software, such as changing alarm levels for individual channels, changing the default values for individual channels, and scaling individual channels. The update rate for channel data is 20mS at 50Hz filter frequency and 16.7mS at 60Hz filter frequency.

 

To monitor status for this module, diagnostic features and on-board LED lights are provided. Diagnostic reports on range status, field power loss, NVRAM faults, the presence of open wires, and more are available. The LED lights indicate module and power status.

 

The IC200ALG240 is 4.3 inches wide, or 110mm; 2.63 inches tall, or 66.8mm; and 1.956 inches deep, or 50mm. Note: These dimensions do not include the carrier or mating connector height. A 5V and a 3.3V connection backplane are used for this module, through which power is provided to the device. The 5V backplane consumes up to 15 milliamps of current, and the 3.3V backplane consumes up to 120 milliamps of current.

GE Versamax IC200ALG230 is an analog input module, 12 bit voltage/Current 4 Channel. The GE Versamax IC200ALG230 provides an interface to 4 voltage inputs or 4 current inputs. GE Versamax IC200ALG230 inputs are single-ended, with all inputs sharing a common return. 
 

• Powerful and Reliable VersaMax controllers provide powerful, reliable operation.
• Modular, high-density VersaMax IO is versatile, compact, and affordable. Its scalable architecture and ease of use save time and money for both machine builders and end users. Media redundancy and hot swap capability increase uptime. A broad range
• Designed to minimize costs, these versatile controllers are easy to use and support and offer a wide range of I/O expansion modules and communications options.

Analog Output, 13 Bit, Current, 12 Channel
Analog output module IC200ALG326 provides eight 4mA to 20mA analog current-sourcing outputs. Analog output module IC200ALG328 provides twelve 4mA to 20mA analog current-sourcing outputs. Including a modest amount of overrange current, approximately 20.38mA of output current per channel is available to drive output loads.

• RX3I RACKLESS CPU MODULE 1.2GHZ 64MB W,

·        Input Power (Max) - 20 Watts, Input Voltage (Min) - 18 VDC, Input Voltage (Max) - 30 VDC

Ø User may program in Ladder Diagram, Structured Text, Function Block Diagram, or C. o Contains 64 Mbytes of configurable data and program memory.

Ø Supports auto-located Symbolic Variables that can use any amount of user memory.

Ø Reference table sizes include 32k bits for discrete %I and %Q and up to 32k words each for analog %AI and %AQ. Bulk memory (%W) also supported for data exchanges.

Ø The real-time part of CPL410 is secure by design, incorporating technologies such as Trusted Platform Modules, secure boot, and encrypted firmware updates.

 

Ø  It is neither accessible or modifiable by customers nor intruders, thus guaranteeing the integrity of the controller.

The IC695PSD140 is a Multi-Purpose, 24 volt DC, 40 Watt Power Supply from the GE Fanuc RX3i Series.  

Analog output 12 bit current 4 channel
Analog output modules IC200ALG320 and BXIOAO4200 provide four 4mA to 20mA analog current-sourcing outputs. Including a modest amount of overrange current, approximately 20.38mA of output current per channel is available to drive output loads. Analog output modules IC200ALG321 and BXIOAO4205 provide four analog voltage outputs. The output range is 0 to +10VDC Analog output modules IC200ALG322 and BXIOAO4210 provide four analog voltage outputs. The output range is -10 to +10VDC 

Emerson make pac system ic695cpe400 4c-1. 2ghz 5xrj45 128gb configuration. Cpu redundant with 4 ethernet / profinet ports. Hot standby cpu supports mqtt protocol previously known as ge intelligent platforms

2 SLOT, DUAL CORE, 1GHZ 64MB CPU WITH

• Programming tools such as tag-based programming, a library of reusable code and a test edit mode for improved online troubleshooting
• User-friendly environment that can increase design flexibility and improve engineering efficiency and productivity
• Plug-and-play addition of PROFINET-enabled devices makes it easy to securely connect machines, data and people
• Unique reflective memory technology keep CPUs synchronized with simple configuration, minimal impact to application performance, and bumpless switchover in case of failure
• High-speed processor and patented technology for faster throughput without information bottlenecks
• Support for high-density discrete I/O, universal analog (TC, RTD, Strain Gauge, Voltage and Current configurable per channel), isolated analog, high-density analog, high-speed counter, and motion modules
• Supports OPC UA Non-Transparent Server Redundancy