Gururaj Engineers Private Limited

The IC200UDD110 Micro PLC module is a Versamax 28-point PLC made by GE Fanuc. It comes with twelve 24 Volts DC rated outputs and 16 DC inputs. A voltage level of 24 Volts DC of nominal input power is required to operate this PLC module. The IC200UDD110 Micro PLC module is configured to read configurations at power-up from the ROM flash memory or from the RAM. The typical scan rate of the module is 1.1 ms/K for the boolean logic and the real-time clock accuracy is +/- 0.5%. The specifications of the DC power include 19.2 Volts DC to 30 Volts DC of operating voltage range, 10 milliseconds of hold-up time at 19.2 Volts DC, 1 Amp of inrush current at 30 Volts DC, and 5 Watts of rated input power supply.   

The IC200UDD020 PLC module is a Versamax 20-point Micro/Micro Plus PLC module that is made by GE Fanuc. It comes with 12 DC inputs, 4 ESCP outputs, and 4 low-current outputs. It uses a 24 Volts DC power supply to power up the input circuits and for normal operation. The IC200UDD020 PLC module consumes 8 milliamps of current per point. The specifications of the DC power supply include 19.2 to 30 Volts DC of operating voltage range, 10 milliseconds of hold up time at 19.2 Volts DC, 1 Amp of inrush current at 30 Volts DC, and 0.2 Amps of input current at 24 Volts DC. Its I/O points can be expanded by using the compatible expander module that best suits the users’ needs.  

• The small-footprint VersaMax Micro PLC offers the flexibility of modular design and a variety of built-in features, including up to 64 I/O points (expandable to 170 I/O points), fast cycle times, a robust instruction set and extensive memory that multiplies your programming options.

The GE Fanuc IC693CPU313 is an embedded CPU with a 5-slotted baseplate that contains single baseplate per system. This module reaches a processing speed of 10 MHz with the processor 80188. The power required to perform its function is 5 VDC and the current drawn by this module is 430 mA. This operation of this module happens at a temperature range from 0°C to 60 °C.

The IC693CPU313 is provided with a maximum user memory of 12 KB for programming which is allocated in various memory types. The user memory associated with the Analog input (%AI) and Analog output (%AO) is 64 words and 32 words respectively. This module requires 128 bits of memory for the reference of system status in which each sub-memory types requires 32 bits. The memory is also allocated for system registers (%SR) of 16 words. The register memory also has maximum space for storing up to 1024 words of data. The memory associated with internal coils (%M) and temporary output coils (%T) is 1024 bits and 264 bits respectively. The main memory in the IC63CPU313 is discrete global memory (%G) which is 1280 bits.

IC200ALG331 is a 4 Channel Isolated 16 Bit, Voltage Current Analog Output module from the GE Fanuc Versamax Series.

Minimum order quantity: 1 Piece

Analog mixed 12bit; 4 current channel in and 2 current channel out

The GE Fanuc IC693PWR331 is a High Capacity power supply. This Series 90-30 unit runs off DC input. It has a 30 watt wide range and is designed for 24 VDC nominal inputs. If used in applications that demand more than +5V current capacity than provided by the standard supply, the IC693PWR331 power supply will allow all 30 watts to be consumed from its +5 V output.  The unit accepts an input voltage range from 2 VDC to 30 VDC and is capable of maintaining all outputs within specifications with input voltages as low as 2 VDC. That being said, the power supply will not start with initial input voltages less than 8 VDC. Three different outputs are available from this supply. The smallest is +5 VDC output. The other two are +24 VDC. One of these is +24VDC Relay power outputs, which supplies power Series 90-30 Output Relay module circuits. The last is Isolated +24 VDC. Typically, this power is used internally by some modules; however, it may also supply external power to 24 VDC Input modules.