Gururaj Engineers Private Limited

The IC695PNC001 is a PACSystems PROFINET Controller Module from the GE Fanuc RX3i Series.  This module connects a PACSystem RX3i controller to a high-speed PROFINET local area network.

The IC695CPU320 is a Central Processing Unit from the GE Fanuc PACSystems RX3i Series. The IC695CPU320 has an Intel Celeron-M  microprocessor rated for 1 GHz, with 64 MB of user (random access) memory and 64 MB of flash (storage) memory. RX3i CPUs are programmed and configured to control machines, processes, and material handling systems in real time.

The IC695PSD040 is a 24 volt DC, 40 Watt Power Supply from the GE Fanuc RX3i Series. 

The IC695CPE310 is a CPU in the GE Fanuc PACSystem RX3i Series.  The CPU can  perform real-time control of machines, processes, and  material handling systems. It communicates with I/O and Intelligent Option modules over a dual-purpose PCI and serial backplane. 

 The IC695PSA140 is a Multi-Purpose, 120/240 volt AC or 125 volt DC, 40 Watt Power Supply from the GE Fanuc RX3i Series

We are engaged in offering a wide range of Gururaj Engineers Private Limited to our clients. Our range of all products is widely appreciated by our clients.

The IC695RMX128 is a Redundancy Memory Xchange module from the GE Fanuc RX3i Series

The IC694BEM331 controller is a Genius I/O Bus controller manufactured by GE Fanuc Automation as a member of the RX3i PACSystems product line. It is designed to interface seamlessly with the RX3i PACSystems controllers as well as the serial Bus I/O. This controller is well matched with and works with various blocks, remote drops, controllers, handheld monitoring devices, and I/O stations. The IC694BEM331 controller allows for exchange of up to 128 data bytes on the I/O bus at one time. 

The IC695ETM001 is an Ethernet Interface module from the GE Fanuc RX3i Series. The Ethernet Interface Module connects a PACSystems RX3i to an Ethernet network. It enables the RX3i controller to communicate with other PACSystems equipment and with Series 90 and VersaMax controllers

The IC200UDR164 module is a power supply module with 64 I/O points including 40 input points and 24 relay outputs. It is manufactured by GE Fanuc Automation as a member of the Versamax product line and it is designed for use in applications in the automation industry. The IC200UDR164 power supply module features outputs and inputs which are specially designed for use with a wide range of well-matched I/O equipment. This unit operates on a nominal input voltage of 100 to 240 Volts AC, which is designed for PLC operations. The outputs of this GE Fanuc power supply module are usually open and they also come with 1 pole as well as a throw mechanism. These kinds of outputs are intended to help in controlling different load devices. Examples of the main load devices include motor starters, solenoids, and indicators. The outputs feature a switching capacity of 2 Amps and there is an external power supply that should be installed for external devices.

The GE Fanuc IC693CPU360 is a Central Processing Unit (CPU) 360 Module. It has 240 Kbytes of Configurable User Memory. This is a single slot CPU module with 4096 discrete I/O points across 8 racks. The typical scan rate of the CPU 360 module is 0.22 mS per 1K of logic memory. Although the module has no built-in serial ports, it can use the connector on a PLC power supply. This module has both RAM and Flash memory and like other IC693 modules, it is compatible with Firmware v.10.60. This unit is compatible with the Series 90-30 range from GE Fanuc. When using this CPU with entry-level applications with low I/O counts, the CPU is embedded into the backplane. This makes all slots available for input or output usage. Ethernet, various bus modules, and control devices are some of the compatible devices that can operate with this CPU module.

IC693PWR330 is a High Capacity Power Supply with 30 watts output and 120/240 VAC/125 VDC Input. There are applications that might need high +5V current capacity which may not be present with the standard supply(IC693PWR321).Therefore, this high capacity power supply permits each one of the 30 watts to be utilized from the +5V supply. IC693PWR330 can function from an input voltage source within the range of 85 to 264 VAC or 100 to 300 VDC. This power supply offers a +5 VDC output, +24 VDC Relay power outputs which distribute power to circuits on Series 90-30 Output Relay modules. An Isolated +24 VDC utilized internally by some modules may be used to offer external power for 24 VDC Input modules. IC693PWR330 has field Wiring Connections for the AC/DC Input Power Supplies. These two power supplies consist of 6 terminals used for user link up. These links include; AC Power Source, 20 VAC power source, and ground wires from the 240 VAC power source. They are attached to the system via the top 3 terminals on the front of the power supply. Their sensitivity to an AC/DC input power supply is normally low.